Fusion360 File

• • https://a360.co2rDyzQu
  • 2 X M6 Push in Fitting
  • 1 x 1/8 J-head e3d
  • https://www.thingiverse.com/thing:2907762

Startcode
G28 ; Home extruder
G1 Z15 F{Z_TRAVEL_SPEED}
M107 ; Turn off fan
G90 ; Absolute positioning
M82 ; Extruder in absolute mode
{IF_BED}M190 S{BED}
; Activate all used extruder
{IF_EXT0}M104 T0 S{TEMP0}
G92 E0 ; Reset extruder position
; Wait for all used extruders to reach temperature
{IF_EXT0}M109 T0 S{TEMP0}

Endcode
;G1 X0 Y0 Z130 ; Get extruder out of way. Uncomment to use!
M107 ; Turn off fan
; Disable all extruder
G91 ; Relative positioning
{IF_EXT0}T0
{IF_EXT0}G1 E-1 ; Reduce filament pressure
M104 T0 S0
G90 ; Absolute positioning
G92 E0 ; Reset extruder position
M140 S0 ; Disable heated bed
M84 ; Turn steppers off

Vor extruder wechsel
G92 E0
G1 E1 F500
G92 E0
G1 E-10 F40000
G92 E0
G1 X0 F1000

Nach extruder wechsel
G92 E0
G1 E58 F500
G92 E0